Model
1001 - 4" Chopper - Unique
compact design
- Measured
Drop Off Gauge
- Quick
blade adjustment/replacement
- Flat,
accurate, distortion free cuts
- Hardened
tool steel blades
- Useable
finger guard
- Weight:
Approximately 7 Lbs.
SHR-101M - Mini Chooper Shear - 4"
SHR-101P - Mini Chooper Shear - 4"
|
|
Model
2001 - 12" Traditional Style - Divided
Work Surface for extended Blade life
- Twin
Lexan safety shields
- Enhanced
Upright Ruler with two scales
- New
rear Precision Drop-Off Gauge
- Upper
Curved Power Blades for metal or plastic
- Rapid
Blade adjustment & replacement
- Long
handle for maximum shear power
- Modular
construction - NO CASTINGS!
- Improved
wear parts.
- Size:
26"L x 14"W x 11" H
- Weight:
Approximately 35 Lbs.
SHR-M12 - Metal - 12"
SHR-P12
- Plastic - 12"
| 
|
Table Shears
- Ideal for cutting nameplates, badges and strips
- Clean cut, does not
burr. Cuts up to 12" wide by any length
- Plastics shears cuts up to
-
1/16" thick flexible plastics
- Metals shears cuts brass up to .025";
aluminum up to .040"
SHR-MB1 - Metal Shear 12"
SHR-PB1 - Plastics Shear 12"
Replacement Shear Blades
SHR-UM1 - Upper Metal Blade 12"
SHR-UP1 - Upper Plastics
Blade 12"
SHR-RLR - Replacement Ruler
|
|
Model
3001 - 13" or 19" Guillotine Shears - Flat,
distortion free shear cuts
- Reversible cutting action
- Reversible
Rear Drop-Off Gauge
- Long
handle for maximum shear power
- Handle
easily located on left or right
- Hardened
Tool Steel Blades
- Rapid
Blade adjustment & replacement
- Modular
construction - NO CASTINGS!
- Size: 26"L x 19"W x 12.5"H; 26"L
x 25"W x 12.5"H
- Weight:
Approximately 85 Lbs.; 125 Lbs.
|
|
25"
Guillotine Shear25"
Guillotine Shear -Many
shops need a larger shear but lack the floor space to install one. Our 25” bench
shear is the perfect solution. Manufactured with the highest quality materials
by one of the country’s leading tool manufacturers, it features a movable shear
handle and blades that are both interchangeable and reversible. Like all of our
shears, it is dependable and accurate and easy to service and repair. |
|
Cornermate Corner Rounder
- Capacity: Brass .025, Steel .015, Aluminum .040, Plastic .062
- Corners
without burrs or distortion
- Heavy duty aluminum work table with tool steel-hardened
punch and die shapes
| DIE |
RADIUS | NOTCHER |
SCALLOP | | 1/8" | DIE-018R | DIE-018N | |
| 1/4" | DIE-025R | DIE-025N | DIE-025S |
| 5/16" | DIE-516R | | |
| 3/8" | DIE-038R | DIE-038N | DIE-038S |
| 1/2" | DIE-050R | DIE-050N | DIE-050S |
| DIE |
ORNAMENTAL | DECORATIVE |
STEP | | 1/4" | | | DIE-025P |
| 3/8" | DIE-038L | DIE-038D | DIE-038P |
| 1/2" | DIE-050L | DIE-050D | |
| 5/8" | DIE-058L | DIE-058D | |
| Hole Punch | DIE-032HP | 3/32,
adjusts 1/8" to 1/2" from plate edge | | Slot
Punch | DIE-SLT | 3/32
x 9/16, 2" maximum width |
|
|
ECM - Electric
CornermateThe ECM has
been improved and is in production once again. The customer requested improvements
include a larger work surface, stronger case with 1/4" sides, and the ability
to use the slot punch with material up to 5 1/2" wide! |
|
BEVELERThe
Beveler provides smooth beveled edges for finishing plaques, signs and
badges. It includes a 45° solid carbide beveler cutter, nylon guide, operating
instructions, wrenches, and an adapter that accepts a vacuum cleaner hose to remove
the cuttings and provide a clean work surface. The work table is made from durable
steel. It is available with either a 110 or 230 volt motor. |
|
Vacuum Chip Removal
System - VAC-000 - Pump is rated for continuous heavy duty use, and
is exceptionally quiet
- System offers quick easy removal of collected chips
- Adapter
fits most engraving spindles with interchangeable 11/64", 1/4" and 1"
Teflon™ tips
| 
|
Safety Saw - SAW-000
- A precision cutting tool specially designed for plastics. Can also
cut non-ferrous metals
- A heavy-duty 1/4 HP DC motor glides smoothly along
two hardened steel rails with linear ball bearings for precise cuts
- Accepts
materials up to 1/4" thick and 14" x 30-1/2" in size
- Quiet
and safe operation, minimal danger of injury when correctly operated
- Equipped
with a protruding "off/emergency" button which allows immediate shut
down by leaning on the button
- Enclosed carbide saw blade and vacuum outlet
with 110 volt AC receptacle for automatic vacuum operation
|  |
Strip Heater - HTR-036 - Ideal
for bending fold-over badges and easel type signs
- Bends flexible engraving
plastic and acrylic sheeting
- Features on/off switch, pilot light, thermostat
controlled low/high setting
- Table is 7" wide x 36", heating
element is 34" long
- 500 watts, 115 AC volts
- Heating element
insulated from frame
Extra Element - HTR-ELE |  |
| |
