|
|
Half Round
| Burnishing | Quarter-Round
|High Speed | Specialized
Bevel & Border | End
Mill | Diamond Gravers | Nose
Cones | Accessories/Jigs
Half Round Cutters
 |
- 100% SOLID MICRO-GRAIN CARBIDE engraving cutters engineered
for strength and wear-resistance
- Will not RUST, BEND or TWIST
- Shank CANNOT be damaged from Cutter Knob Set Screw
- High precision gauging and inspection of all cutters
- Provides the best possible cut, with minimum vibration and tool
wear
- Cutters and diamond gravers for all popular engraving machines
- "Specialized" cutter requests welcomed
- "GOLD STANDARD" titanium nitride coating reduces
heat build-up. Higher speeds and feeds, better and more engraving,
fewer cutter changes. Reduced cutter deflection, 3-5 times normal
edge life
- Resharpened "GOLD STANDARD" cutters outlast
uncoated cutters 2-3 times
|
 |
MICRO-GRAIN "HALF ROUND" CUTTERS
| Cutter Shank Size |
Plastic |
Brass/Aluminum |
Steel/Stainless |
Acrylic* |
| 1/8" x 4-1/2" |
CC1-700-TIP |
CC1-814-TIP* |
CC1-614-TIP* |
CC1-914-TIP* |
| 11/64" x 6-1/2" |
CC2-700-TIP |
CC2-814-TIP* |
CC2-614-TIP* |
CC2-914-TIP* |
| 1/4" x 6-1/2" |
CC3-700-TIP |
CC3-814-TIP* |
CC3-614-TIP* |
CC3-914-TIP* |
| 4 mm x 110 mm |
CC4-700-TIP |
CM4-800-TIP |
CM4-600-TIP |
CM4-900-TIP |
| 6 mm x 160 mm |
CC6-700-TIP |
CM6-800-TIP |
CM6-600-TIP |
CM6-900-TIP |
| 1/8" x 1" |
CC8-700-TIP |
CC8-800-TIP |
CC8-600-TIP |
CC8-900-TIP |
*Quarter-round design
- SPECIFY Tip size required. Refer to above cutter tip chart
- Additional tip sizes available upon request, on all cutters
"GOLD STANDARD" TITANIUM NITRATE COATED
| Cutter Shank Size |
Plastic |
Brass/Aluminum |
Steel/Stainless |
Acrylic* |
| 1/8" x 4-1/2" |
GS1-700-TIP |
GS1-814-TIP* |
GS1-614-TIP* |
GS1-914-TIP* |
| 11/64" x 6-1/2" |
GS2-700-TIP |
GS2-814-TIP* |
GS2-614-TIP* |
GS2-914-TIP* |
| 1/4" x 6-1/2" |
GS3-700-TIP |
GS3-814-TIP* |
GS3-614-TIP* |
GS3-914-TIP* |
*Quarter-round design
- SPECIFY Tip size required. Refer to above cutter tip chart
- Additional tip sizes available upon request, on all cutters
|
Cutter Resharpening
- Available for all cutters. Your cutters are sharpened and returned
- Specify tip required. See above chart
- DO NOT use tape on cutter shank
|
 |
|
Home | About CESCO
| Sublimation Products | Laser
Products | Rotary Products |
| General Supplies | Customer
Terms | Contact CESCO |
Canadian Engravers Supply Co.
385 Admiral Boulevard, Unit 2, Mississauga, ON, L5T 2M8
Tel: 905•795•1262 Fax: 905•795•0219 Toll-free
Fax: 1•800•632•3726
e-mail: info@canadianengravers.com
Copyright© 2001, Canadian Engravers Supply
Company Ltd., All Rights Reserved Legal Notices