High Speed Steel Cutters

100% SOLID MICRO-GRAIN CARBIDE engraving cutters engineered for strength and wear-resistance (Metric Cutters)
High Speed Steel Cutters

HIGH SPEED STEEL CUTTERS

Cutter Shank Size	Plastic	Brass/Aluminum	Steel/Stainless	Acrylic
1/8" x 4-1/2"	SS1-700-TIP	SS1-800-TIP	SS1-600-TIP	SS1-900-TIP
11/64" x 6-1/2"	SS2-700-TIP	SS2-800-TIP	SS2-600-TIP	SS2-900-TIP
1/4" x 6-1/2"	SS3-700-TIP	SS3-800-TIP	SS3-600-TIP	SS3-900-TIP

SEAL CUTTER

Cutter Shank Size	Part No.	Cutter Shank
1/8" x 4-1/2"	CC1-SLC-010	Carbide
1/8"" x 4-1/2"	SS1-SLC-010	High Speed Steel
11/64" x 6-1/2"	CC2-SLC-010	Carbide
11/64" x 6-1/2"	SS2-SLC-010	High Speed Steel
1/4" x 6-1/2"	CC3-SLC-010	Carbide
1/4" x 6-1/2"	SS3-SLC-010	High Speed Steel

For engraving seal dies
Standard tip size is .010, other sizes available upon request

METRIC CUTTERS - Micro-Grain Carbide

Cutter Shank Size	Plastic	Brass/Aluminum	Steel/Stainless	Acrylic
4 mm x 110 mm	CM4-700-TIP	CM4-800-TIP	CM4-600-TIP	CM4-900-TIP
6 mm x 110 mm	CM6-700-TIP	CM6-800-TIP	CM6-600-TIP	CM6-900-TIP

SPECIFY Tip size required. Refer to above cutter tip chart
Additional tip sizes available upon request, on all cutters
Metric Cutter Wrench available

Cutter Resharpening

Available for all cutters. Your cutters are sharpened and returned
Specify tip required. See above chart
DO NOT use tape on cutter shank

Half Round | Burnishing | Quarter-Round |High Speed | Specialized
Bevel & Border | End Mill | Diamond Gravers | Nose Cones | Accessories/Jigs

Canadian Engravers Supply Co.
385 Admiral Boulevard, Unit 2, Mississauga, ON, L5T 2M8
Tel: 905•795•1262 Fax: 905•795•0219 Toll-free Fax: 1•800•632•3726
e-mail: info@canadianengravers.com