|
|
Half Round
| Burnishing | Quarter-Round
|High Speed | Specialized
Bevel & Border | End
Mill | Diamond Gravers | Nose
Cones | Accessories/Jigs
 |
Specialized Cutters
- 100% SOLID MICRO-GRAIN CARBIDE engraving cutters engineered
for strength and wear-resistance
- Will not RUST, BEND or TWIST
- Shank cannot be damaged from cutter knob set screw
|
 |
BRAILLE CUTTERS
|
Shank Size |
Part No. |
| 1/8" x 4-1/2" |
CC1-BRA-000 |
| 11/64" x 6-1/2" |
CC2-BRA-000 |
| 1/4" x 6-1/2" |
CC3-BRA-000 |
PROFILING CUTTER
- Narrow cutting angle is effective
for profiling and cutting out shapes
- Use for cutting through applique
for ADA signage
|
Shank Size |
Part No. |
| 1/8" x 4-1/2" |
CC1-PRF-020 |
| 11/64" x 6-1/2" |
CC2-PRF-020 |
| 1/4" x 6-1/2" |
CC3-PRF-020 |
PARALLEL CUTTER
- Specify tip size and thickness
of material you are engraving through
- Cutter makes a straight-edge cut narrower
than shank diameter (smallest size is .060)
|
Shank Size |
Part No. |
| 1/8" x 4-1/2" |
CC1-PLL-TIP |
| 11/64" x 6-1/2" |
CC2-PLL-TIP |
| 1/4" x 6-1/2" |
CC3-PLL-TIP |
RUBBER STAMP CUTTER
- Specify cutter tip size required,
.015 or .030
- Other sizes available upon request
|
Shank Size |
Part No. |
| 1/8" x 4-1/2" |
CC1-RBS-TIP |
| 11/64" x 6-1/2" |
CC2-RBS-TIP |
| 1/4" x 6-1/2" |
CC3-RBS-TIP |
|
|
 |
|
Home | About CESCO
| Sublimation Products | Laser
Products | Rotary Products |
| General Supplies | Customer
Terms | Contact CESCO |
Canadian Engravers Supply Co.
385 Admiral Boulevard, Unit 2, Mississauga, ON, L5T 2M8
Tel: 905•795•1262 Fax: 905•795•0219 Toll-free
Fax: 1•800•632•3726
e-mail: info@canadianengravers.com
Copyright© 2001, Canadian Engravers Supply
Company Ltd., All Rights Reserved Legal Notices