|
 
|
Half Round | Burnishing
| Quarter-Round |High
Speed | Specialized | Bevel
& Border | End Mill
Collet Cutters | Super Carbide Collet Cutters | Diamond Gravers
| Nose Cones | Accessories/Jigs
Quarter-Round Cutters
 |
- 100% SOLID MICRO-GRAIN CARBIDE engraving cutters engineered
for strength and wear-resistance
- Tools last longer due to less chatter and re-cutting of chips.
Special "Quartered" tool shape makes fewer burrs and
cuts faster
- LESS VIBRATION, single pass engraving
- Extra HIGH PERFORMANCE on various materials such as: Brass,
Aluminum, Flexible Plastics, Stainless, Pewter, Acrylic, Lucite,
Plexiglass and Polycarbonate
- Superior alternative to normal half-round engraving cutters
- "Specialized" cutter requests welcomed
- "GOLD STANDARD" titanium nitride coating reduces
heat build-up. Higher speeds and feeds, better and more engraving,
fewer cutter changes. Reduced cutter deflection, 3-5 times normal
edge life
- Resharpened "GOLD STANDARD" cutters outlast
uncoated cutters 2-3 times
|
 |
QUARTER-ROUND (1/4 RD) CUTTERS
| Cutter Shank Size |
Plastic |
Brass/Aluminum |
Steel/Stainless |
Acrylic |
| 1/8" x 4-1/2" |
CC1-714-TIP |
CC1-814-TIP |
CC1-614-TIP |
CC1-914-TIP |
| 11/64" x 6-1/2" |
CC2-714-TIP |
CC2-814-TIP |
CC2-614-TIP |
CC2-914-TIP |
| 1/4" x 6-1/2" |
CC3-714-TIP |
CC3-814-TIP |
CC3-614-TIP |
CC3-914-TIP |
- SPECIFY Tip size required. Refer to above cutter tip chart
- Additional tip sizes available upon request, on all cutters
"GOLD STANDARD" TITANIUM NITRATE COATED
| Cutter Shank Size |
Plastic |
Brass/Aluminum |
Steel/Stainless |
Acrylic |
| 1/8" x 4-1/2" |
GS1-714-TIP |
GS1-814-TIP |
GS1-614-TIP |
GS1-914-TIP |
| 11/64" x 6-1/2" |
GS2-714-TIP |
GS2-814-TIP |
GS2-614-TIP |
GS2-914-TIP |
| 1/4" x 6-1/2" |
GS3-714-TIP |
GS3-814-TIP |
GS3-614-TIP |
GS3-914-TIP |
- SPECIFY Tip size required. Refer to above cutter tip chart
- Additional tip sizes available upon request, on all cutter
Cutter Resharpening
- Available for all cutters. Your cutters are sharpened and returned
- Specify tip required. See above chart
- DO NOT use tape on cutter shank
|
|
