Half Round | Burnishing | Quarter-Round |High Speed | Specialized | Bevel & Border | End Mill
Collet Cutters | Super Carbide Collet Cutters | Diamond Gravers | Nose Cones | Accessories/Jigs

Specialized Cutters

  • 100% SOLID MICRO-GRAIN CARBIDE engraving cutters engineered for strength and wear-resistance
  • Will not RUST, BEND or TWIST
  • Shank cannot be damaged from cutter knob set screw

BRAILLE CUTTERS

  • For ADA signage
 Shank Size Part No.
1/8" x 4-1/2" CC1-BRA-000
11/64" x 6-1/2" CC2-BRA-000
1/4" x 6-1/2" CC3-BRA-000

PROFILING CUTTER

  • Narrow cutting angle is effective for profiling and cutting out shapes
  • Use for cutting through applique for ADA signage
 Shank Size Part No.
1/8" x 4-1/2" CC1-PRF-020
11/64" x 6-1/2" CC2-PRF-020
1/4" x 6-1/2" CC3-PRF-020

PARALLEL CUTTER

  • Specify tip size and thickness of material you are engraving through
  • Cutter makes a straight-edge cut narrower than shank diameter (smallest size is .060)
 Shank Size Part No.
1/8" x 4-1/2" CC1-PLL-TIP
11/64" x 6-1/2" CC2-PLL-TIP
1/4" x 6-1/2" CC3-PLL-TIP

RUBBER STAMP CUTTER

  • Specify cutter tip size required, .015 or .030
  • Other sizes available upon request
 Shank Size Part No.
1/8" x 4-1/2" CC1-RBS-TIP
11/64" x 6-1/2" CC2-RBS-TIP
1/4" x 6-1/2" CC3-RBS-TIP

VINYL CUTTING BLADES

  • Other sizes available upon request
 Blade Size Part No.
30° Blade VCB-030
45° Blade VCB-045

| Home | About CESCO | Sublimation Products | Laser Products | Rotary Products |
| General Supplies | Customer Terms | Contact CESCO |

Canadian Engravers Supply Co.
Canadian Engravers Supply Co.
385 Admiral Boulevard, Unit 2, Mississauga, ON, L5T 2M8
Tel: 905•795•1262    Fax: 905•795•0219   Toll-free Fax: 1•800•632•3726
e-mail: info@canadianengravers.com

Copyright© 2001, Canadian Engravers Supply Company Ltd., All Rights Reserved Legal Notices